PRODUCTS LIST
Bambu Lab Textured PEI Plate - A1 Mini Product model BL0077 Brand Bambu Lab Price 190 **For A1 Mini
Quantity
Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements
PEI enables printing with common materials such as PLA, TPU, PETG and PVA.
Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you
Step 2: Lower the plate and secure to the magnetic platform
• Increasing the temperature of the heated enhances the adhesion of the filament to the build plate. Users can adjust the temperature of the heatbed or apply glue if additional adhesion is needed. • During the printing process, dust and grease on the surface of the build plate can negatively impact material adhesion. It is recommended to regularly clean the surface with detergent and water to eliminate any dust or grease residue first. If it doesn't work, clean the surface with alcohol. • Wait until the build plate fully cools down to prevent damage to the plate and prints when removing the printed parts. • Do not clean the plate with acetone, as it will damage the PEI surface. • Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion. • The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
材料
PEI powder coating+ 301SEH Stainless Steel Plate
表面耐溫
Up to 180℃
柔性不鏽鋼板厚度
0.4 mm
紋理PEI塗層厚度
0.075 mm
可使用的列印尺寸
180*180 mm
包裝尺寸
220*195*15 mm
包裝重量
230 g
顏色
Gold
Browsing records